• Taper Bush

    Taper Bush

    Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are already provided with the required bore, keyway, threaded holes and setting screws, thus allowing to save time and money on machining processes. All taper bushes in our range are designed for use with all the following products: Chain sprockets V-belt pulleys Timing belt pulleys Flexible couplings HRC couplings Weld-on hubs INSTALLATON  (1) Af...
  • V-Belt Pulleys

    V-Belt Pulleys

    V-belt pulleys (also called v- belt sheaves) are devices which transmit power between axles by the use of a v-belt, a mechanical linkage with a trapezoidal cross-section. Together these devices offer a high-speed power transmission solution that is resistant to slipping and misalignment.  V-belt pulleys are solely used for transmitting power between two parallel axels. The most notable difference between a v-belt pulley and other types of pulleys (round belt, flat, etc.) would be the geometry...
  • taper bore v-pulleys SPZ

    taper bore v-pulleys SPZ

    SPZ-1  SPZ-2  SPZ-3  SPZ-4  SPZ-5  SPZ-6  SPZ-8   SPZ V belt pulley 1. Material: Cast iron GG25, Ductile iron 2. Process: Machining – phosphating 3. Standard: European and American Standard V pulley, v belt pulley, v groove pulley, v groove belt pulley, taper lock pulley, taper lock v belt pulley, taper lock bushing pulley, taper lock pulleys / taper bore pulley, large v belt pulley, double v belt pulley, cast iron v belt pulley belt pulley, variable speed v belt pulleys, v belt pu...
  • taper bore v-pulleys SPA

    taper bore v-pulleys SPA

    Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and benchmark diameter selection;  The slot Angle of the belt ...
  • taper bore v-pulleys SPB

    taper bore v-pulleys SPB

    SPB-1  SPB-2  SPB-3  SPB-4  SPB-5  SPB-6   SPB-8  SPB-10 Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and b...
  • taper bore v-pulleys SPC

    taper bore v-pulleys SPC

    SPC-3  SPC-4  SPC-5  SPC-6  SPC-8  SPC-10 Narrow V belt SPZ SPA SPB SPC, each type of triangle belt defines the section size of triangle belt.   At the same time, the minimum diameter of the small belt pulley corresponding to each wheel groove Angle of each type of triangle belt is specified, but the large belt pulley is not specified.  The belt pulley groove Angle is divided into 34 degrees 38 degrees, the specific selection should be based on the belt pulley groove type and benchmark diamet...
  • Timing-Belt Pulleys

    Timing-Belt Pulleys

      Materials used for timing  pulleys     Alumimium 6082      Steel C45      Cast iron GG25 The surface treatment of timing belt pulleys is black phosphated (except aluminium material).The timing belt pulleys that made of GG25 cast iron should be dynamiclly balanced. (Grade 6.3) Product  Name Aluminium Timing Pulley  XL L H XH XXH T2.5 T5 T10 AT5 AT10  GT2 GT3 GT5 3M 5M 8M Tooth timing Belt Pulley Teeth profile Trapezoidal toothed  XL, L, H, XH, XXH T-toothed T2.5, T5, T10, T20 Arc toothed HTD...
  • HTD Taper Bore Timing Pulleys

    HTD Taper Bore Timing Pulleys

    HTD Taper Bore Timing-Pulleys   HTD 3M    HTD 5M    HTD 8M    HTD 14M       HTD 20M
  • HTD Taper Bore timing Pulleys 5M

    HTD Taper Bore timing Pulleys 5M

    HTD Taper Bore Timing Pulleys  5mm Pitch 5M-15   34-5M-15~150-5M-15 Material:  Steel, Cast Iron 
  • HTD Taper Bore timing Pulleys 8M

    HTD Taper Bore timing Pulleys 8M

    HTD Taper Bore Timing Pulleys    8mm Pitch 8M-20(20mm Wide Belt)    8mm Pitch 8M-30(30mm Wide Belt) 8mm Pitch 8M-50(50mm Wide Belt)     8mm Pitch 8M-85(85mm Wide Belt)   Material:  Steel,  Cast Iron We can supply different size timing belt pulleys. HTD 8M-20 pulley for belt width 20 mm P22-8M-20, P24-8M-20, P26-8M-20, P28-8M-20, P30-8M-20, P32-8M-20, P24-8M-20, P36-8M-20, P38-8M-20, P40-8M-20, P44-8M-20, P48-8M-20, P56-8M-20, P64-8M-20, P72-8M-20, P80-8M-20,P 90-8M-20 HTD 8M-30 pulley for ...
  • HTD Taper Bore Timing Pulleys14M

    HTD Taper Bore Timing Pulleys14M

    HTD Taper Bore Timing Pulleys  14mm Pitch 14M-40(40mm Wide Belt)        14mm Pitch 14M-55(55mm Wide Belt) 14mm Pitch 14M-85(85mm Wide Belt)        14mm Pitch 14M-115(115mm Wide Belt) 14mm Pitch 14M-170(170mm Wide Belt)  Material:   Steel,  Cast Iron We can supply different size timing belt pulleys. HTD 14M-40 pulley for belt width 40 mm 28-14M-40, 30-14M-40, 32-14M-40, 34-14M-40, 36-14M-40, 38-14M-40, 40-14M-40, 44-14M-40, 48-14M-40, 56-14M-40, 64-14M-40, 72-14M-40, 80-14M-40, 90-14M-40, ...
  • Taper Bore timing Pulleys L

    Taper Bore timing Pulleys L

    Taper bore timing pulley L050,L075,L100 Material  steel, Cast iron
123 Next > >> Page 1 / 3